8] FILIPOVIC, M., KAMBEROVIC, K., KORAC, M., et al., “Microstructure and mechanical properties of. Fe–Cr–C–Nb white cast irons”, Materials and Design, v. 47, 

The 4 types of Cast iron are presented below along with its composition, Microstructure, properties, Fracture surface and applications. Gray cast iron; White cast iron; Malleable cast iron; Nodular or SG or ductile iron; Grey Cast Iron: These types of cast iron are widely used. Presence of graphite in the form of flakes (like fibre)

White Cast Iron Microstructure. White iron is too brittle for use in many structural components, but with good hardness and abrasion resistance and relatively low cost, it finds use in such applications as the wear surfaces (impeller and volute) of slurry pumps, shell liners and lifter bars in ball mills and autogenous grinding mills, balls and

Whiteheart malleable cast iron - It is a decarburized cast iron. The microstructure of whiteheart malleable cast iron depends on section size. Small sections contain pearlite and temper carbon in ferritic substrate.

The microstructure and mechanical properties of high chromium white cast iron with composition: 2,6÷3,4% C; 0,9÷1,1% Si; 0,8÷1,1% Mn; 1,0÷1,3% Mo; 

Most white cast irons contain less than 4.3% carbon, with low silicon contents to inhibit the precipitation Ferritic Malleable Cast Iron Microstructure.

Modi Mechanical Engineering Tutorials

21/03/  · This microstructure is of white cast iron with 3-3.5 wt% C. In this microstructure, we clearly see two phases appearing in the microstructure. While you perform etching of material,

chromium cast iron. They found that tungsten can effectively improve the hardness of the matrix and wear resistance of the high chromium cast iron. CHUNG, et al[3], investigated the effect of alloying titanium addition on the microstructure and wear resistance of hypereutectic high chromium white cast iron. The results showed that a fine

A white cast iron with nano-eutectic microstructure was prepared by an aluminothermic reaction casting. Microstructures of the cast iron were investigated by optical microscope (OM), electron probe micro-analyzer (EPMA), scanning electron microscope (SEM) and X-ray diffraction (XRD). Mechanical properties of the cast iron were tested.

K.B. Rundman, in Encyclopedia of Materials: Science and Technology, 2001 14 Malleable Cast Iron, Processing, Microstructure, and Mechanical Properties. Malleable cast iron has lower CE (Table 1) than gray cast iron, solidifying white.The phase diagram and the cooling curve characteristic of white cast iron are illustrated in Fig. 1.It can be seen in the cooling curve that