I just moved into a new house and a shower door has a continuous hinge that New (to me) house needs glass shower door/hinge repair.

To do this, slip the putty knife gently under the strips and move the knife down gradually. For the strip on the other side, repeat the process to extract the strip. If the strips are attached to tiles, you may need to pull off the tiles or loosen them. STEP THREE. The next thing to do is to clean the shower surfaces.

Either the screws in the corners of the door need to be tightened, or it's due to the bathroom floor settling. Depending on how much room you have, you may be able to pull the bottom of the hinge and strike rails over 1/4" and redrill - or, put a 1/4" shim under the bottom of the hinge rail and redrill all hinge rail holes.

Do I need the black continuous hinge and the hinge bushing pin? Here is a picture of the shower door and part that I think needs replacing:.

2010. 1. 5. · Check to see where the shower doors are sticking. Fix any loose screws on the hinge attached to the walls, and then unscrew the other side from the door. Remove the door and clean all of the screws. You can move the upper hinge so that the door is swinging a little higher in the gap, and you can also fix the hinge to the shower door a little further down, so that it flows freely.

Continuous Hinge for Shower Doors Probably the most watertight hinge on the Market for a bespoke shower glass door. This Full Length Shower Hinged Profile is 

Place the smaller end of a flat pry bar under the door hinge and use it to adjust the hinge until the door opens and shuts properly. Have someone hold the pry 

Special thanks to Lee Sawyer, your handyman Lee, for fixing the shower door by fabricating a small part. Lee is a true craftsman and the go to guy when I ca

It is attached with hinges to a braced wall. As long as your shower head isn't directly across from the door, you most likely won't have any leaks regardless of your hinge choice. We have a good 3/8" space on either side of our door with no leaks. Like Babka we have a hinged door that is self-centering and attached to the wall. Very stable. No

Step-wise Guide on How to Fix Continuous Hinge Shower Door Step 1 - Clean the Hinge Cleaning the hinge is a crucial step as it will help you figure out if your hinge is completely broken or not. The first thing that you need to do is remove the door from its hinges to separate it for clear examination.

A2A Without seeing the door, I get the feeling you have to take the door off, grind the old hinges off, and bolt or weld new hinges on.