ControlLogix chassis, where it plugs directly into the backplane. The power supply provides power for all modules installed in the chassis.

1756 ControlLogix Power Supplies Specifications Chassis 1756-A4, 1756-A7, 1756-A10, 1756-A13, 1756-A17 Chassis compatibility Series A Series B Series C Series B Series C Wire size 2.5 mm2 (14 AWG) solid or stranded copper wire rated at 90 °C (194 °F), or greater, 1.2 mm (3/64 in.) insulation max 14.0

Full Description: Allen-Bradley 1756-A10 10 Slot ControlLogix Chassis. The 1756-A10 chassis backplane provides a high-speed communication path between modules and distributes power to each of the modules within the chassis. Any ControlLogix module can be placed into any slot. Slot filler modules (1756-N2) are required to fill empty slots.

1756 ControlLogix Power Supplies Specifications Chassis 1756-A4, 1756-A7, 1756-A10, 1756-A13, 1756-A17 Chassis compatibility Series A Series B Series C Series B Series C Wire size 2.5 mm2 (14 AWG) solid or stranded copper wire rated at 90 °C (194 °F), or greater, 1.2 mm (3/64 in.) insulation max 14.0

1756 standard I/O Chassis are available in five sizes, namely: 1756-A4: 4-Slot Chassis 1756-A7: 7-Slot Chassis 1756-A10: 10-Slot Chassis 1756-A13: 13-Slot Chassis 1756-A17: 17-Slot Chassis B) ControlLogix-XT Chassis ControlLogix-XT 1756 I/O chassis support extreme temperature environments in the range of -25+70 °C (-13+158 °F). They include:

Invalid Input Size" when adding an Prosoft module to RSLogix 5000. Confirm that the Comm Format parameter in the modules I/O configuration is set to Data - INT. The default setting for this parameter in RSLogix5000 is Data - DINT. The MVI56-WA-EIP must be installed in a chassis that also has a ControlLogix processor installed. It will not

ControlLogix controller into any slot of a ControlLogix I/O chassis, and install multiple controllers in the same chassis. ControlLogix controllers can monitor and control I/O across the ControlLogix backplane, and over network links. vary depending on packet size. For more details, see Troubleshoot EtherNet/IP Application Technique

Minimum Cabinet Size IMPORTANT Make sure you meet these minimum spacing requirements. IMPORTANT To meet the UL/CSA standards, the cabinet housing your ControlLogix chassis cannot be smaller than these minimum cabinet size requirements. Chassis Minimum Cabinet Size (W x H x D) 1756-A4 50.7 x 50.7 x 20.3 cm (20 x 20 x 8 in)

The vibration rating is 2G at 10 to 500 Hertz. The operating and non-operating shock ratings are 30G and 50G, respectively. The dimensions of the 1756-A10 are 

The ControlLogix® system is a modular system that requires a 1756 ControlLogix chassis. The chassis are designed for only horizontal back-panel mounting. Place any module into any slot. The backplane provides a high-speed communication path between modules. Summary of Changes

Our Bulletin 1756 ControlLogix® chassis-based modules provide a full range of digital, diagnostic digital, analog, motion control, specialty I/O, and compute modules to meet your application needs. You can use any of the chassis-based modules in the local chassis of a ControlLogix controller or in a chassis linked to a ControlLogix controller